01 · Utility-scale only →
Specialised
We build one thing: ground-mounting solar frames for utility-scale arrays. Every detail of the system is engineered around that single discipline.
N° 001 · Australian Made · Established 2012 · Updated 2026-05-23 · Builds in Progress
Engineered
for the sun.
Solar Mounting Systems designs and manufactures ground-mounted racking for utility-scale solar across Australia, the Middle East, Africa and the Pacific. 8 parts. 2 bolt sizes. Engineered to AS1170.2 by Australians, for Australian conditions.
Specification
Ground-mount frame system
Cold-formed Australian steel
Patented 8-part assembly
Two bolt sizes · simple install
Wind-rated to AS1170.2
Cold-formed Australian steel
Patented 8-part assembly
Two bolt sizes · simple install
Wind-rated to AS1170.2
Capacity Range
9 kWp → 2.66 MWp
Provico Solar Array · 1344 kWp / Yongala Solar Farm · 2661 kWp / Frew Solar Farm · 963 kWp / Werrimull Solar Array · 315 kWp / Lake Lookout Offgrid · 239 kWp / Bremco Solar Array · 195.8 kWp / Barwon Water Solar Array · 198 kWp / Lake Condah Solar Array · 165 kWp / NZ Project · 128 kWp / King Valley Wines Array · 108 kWp / Yulara Solar Array · 57.24 kWp / Karragullen Array · 26 kWp / Flood Zone Array · 9 kWp /
Section · 02 — By the Numbers
A decade of structure
under the Australian sun.
From a single inquiry for heavy channel in 2012 to a patented eight-part ground-mount with thirteen completed utility-scale projects.
Total Capacity
6.41 MW
Panels Mounted
16,066
Completed Sites
13
Years Building
14+
Section · 03 — Principles
Built different.
On purpose.
Our ground-mount carries fewer parts than anything else on the market — and that's the point. Less hardware. Faster installs. Higher specifications. Australian-made tonnage.
02 · Local supply chain →
Australian Made
Cold-formed Australian steel, designed and manufactured here. Higher specifications than the imported alternative — and ready when you need it.
03 · Site-specific tuning →
Customised Design
We work side-by-side with the EPC and the engineer of record to tune the frame to the site — soil, wind, flood, salt, slope.
04 · AS1170.2 compliant →
Engineered Solutions
Full compliance to AS1170.2 for wind loading. Every frame stamped, every assumption documented, every connection verified.
Section · 04 — Index of Work
Selected projects.
Section · 05 — Origin
A frame system
that started with
a phone call.
In 2012, Harvey Bennett was approached by an EPC contractor looking for heavy channel for pile-mounted tracking systems. There wasn't an Australian product that fit. So Harvey went looking for one — and when he couldn't find it, he set out to make it.
By 2017, working with Anthony Anderson, that thinking had become a patented ground-mount: 8 parts. 2 bolt sizes. Simpler installs, faster site times, fewer ways for things to go wrong.
Today, that same system is on sites from the shadow of Uluru to the rocky flood plains of New Zealand.
Read About Us →Built for sites in —
04 Regions
- 01 ●Australia
- 02 ●Middle East
- 03 ●Africa
- 04 ●Pacific